Hello.When you connect mk 3 amiga does not start, you can see the indivision logo on the screen and later the black screen. How to disconnect everything returns to normal.Greet
Mk 3 problem
- kajko2
- Thread is marked as Resolved.
Caution: Non registered users only see threads and messages in the currently selected language, which is determined by their browser. Please create an account and log in to see all content by default. This is a limitation of the forum software.
Also users that are not logged in can not create new threads. This is a, unfortunately needed, counter measure against spam. Please create an account and log in to start new threads.
Don't Panic. Please wash hands.
-
-
Please describe your setup - including all expansions, mass storage and power supply. Don't forget to mention your old display solution, which might still be connected (note that an old Microvitec monitor that's still connected and switched off will keep the computer from starting!).
-
I have a Apollo 060 turbo card, a cf card and a floppy disk drive. BenQ monitor 15khz but when connecting indivision video output amiga is disconnected. Atx power supply and reinforced commodore on both system does not boot from the cf card
-
Atx power supply
Please fix that - it's no good for an Amiga. Please read our PSU FAQ.
-
Am I sure that after buying a power supply from your company everything will move
-
Am I sure that after buying a power supply from your company everything will move
You can of course do a test with your current PSU: Remove the Apollo accelerator and see if it starts. I'm pretty certain it does.
-
I already did this, even disconnected the drive and the cf card is kickstart 3.1.4 also did not start. Pressing two buttons in the mouse does not turn on the boot menu
-
Do you have a proper PSU, the original A1200 thing? Just to see what it does with only the flicker fixer installed.
-
-
-
OK, that looks like a known-bad MeanWell PSU. Please use a proper one, for example the CA-PSU. Please do read our PSU FAQ.
-
I understand that it is a matter of bad power supply that amiga does not start with the connected MK3?
-
I just bought your power supply and I hope everything will start working. I respect companies that still support my hobby or amiga, greet
-
Hello again. Power supply from Indivision plugged in but the effects of such me before. Please repair or replace because I paid 200 euros and does not work.regards
-
Sure, we can take a look at it; please read the hints for returning stuff to us.
-
Hello,Package sent,description inside. Package number 13189110014066
Regards
-
Hi, came my package?
-
Can't tell - if you have a warranty ID of the unit, I can check our database.
-
-
I can see that the booking-in procedure for this unit has been started this morning. Unfortunately, the person who is working on it had to attend a funeral today, so I don't have any details (yet).
-
The last reply was more than 365 days ago, this thread is most likely obsolete. It is recommended to create a new thread instead.