Dear all,
I have an issue with my Buddha IDE controller.
When trying to install my A2000 i have an cf card in an adapter connected directly onto the first IDE bus. Jumpers are all set corectly (it has worked).
When booting with floppy, running HDToolBox I can identify the CF Card. However the settings are not retained. After rebooting, all settings are gone.
THis is also the case with partitioning of the CF card.
I can adjust the partition size. I can save the settings withing HD Toolbox, but after that nothing happens. I get no message to reboot. Drives do not appear and after a reboot nothing I have configured is visible.
Further more. When I attach an IDE CD-ROM drive, this unit is only visible when a cf card adapter with cf card (that cannot be configured as mentioned above) is attached.
When only the cd-rom drive attached it is not visible. I have checked all id's etc. Even mounter does not show anaything.
I fear my Buddha has stopped working. Any suggestions are welcome.