Caution: Non registered users only see threads and messages in the currently selected language, which is determined by their browser. Please create an account and log in to see all content by default. This is a limitation of the forum software.
Also users that are not logged in can not create new threads. This is a, unfortunately needed, counter measure against spam. Please create an account and log in to start new threads.
Don't Panic. Please wash hands.
-
No problems here using my clockport rapid road with OS4.1beta. Try to completely remove posiedon and reinstall. Also you could try adding the drivers to the blacklist in compatibility prefs so that the drivers are not using the 68K JIT emulator.
OS4.1 sirion usbstack only has a driver for the highway controller in classics.
If you have installed 4.1 Final Update 2. Rollback to Update1 to see if its down to the kickstart module update and if so post on hyperion forum.
-
This is my solution which uses the expansion port. However, it was already taken up by the 2 external USB ports attached to the subway.
So I designed and 3D printed a bracket to hold the hdmi connector securely using both mounting holes and also an external add on bracket to hold the USB ports. This fits over the floppy mounting screw holes. Its made not to block access to the hdmi or mouse ports.
I also added a short hdmi port saver to minimise the risk of damage to the indivision hdmi port.
-
Now Brexit deal is "done" and the free trade agreement with the EU remains in places, is this just business as usual for UK customers?
-
For me the cheap cables manifested its self as pixels flickering usually RGB. Most noticeable whilst playing Alien Breed 3D2, on the colour cycling texture edges. This A1200 has an 060 at 75mhz so can play ab3d2 with a high frame rate. I bought a pack of 3 4K UltraHD HDMI cables from a well known online retailers "basics" range. Instantly this resolved it for me.
-
There is a memory overlap at 0x0060000 IIRC I reluctantly returned my ACA1211 as I couldn't get a stable system with my PCMCIA network card. I don't think its limited to just the ACA1211 but also other 8MB ram expansions.
I was lucky enough to get one of the last ACA1233n55 in part exchange.
ACA1211 OS 3.1.4.1 Problems when approx 2- 3MB Free Fast RAM / Netgear FA411
Also
https://eab.abime.net/showthread.php?t=97513
-
Hoping to get an order in before we leave the EU. Fingers crossed the politicians can sort this for the good of all European countries before the deadline.
-
Hi did a new a new version get uploaded ?
I've downloaded twice to double check and its still the original v3 archive for me with rtg 42.540, not 42.557.
-
very nice. Looking forward to the email telling me they are available to order.
-
There is a known issue that manifests with either physical 27c400 eproms or a soft kicked 3.1.4 kickstart, this to best of my knowledge has only been reported when used with the aca1211 and certain pcmcia devices such as squirrel scsi interface and netgear fa411.
Hyperion and Icomp are both aware of this and there is a bugzilla open for it.
-
confirmed on A1200, elbox mediator, Radeon 9250
-
As a beta tester I've pointed out this thread to the developers.
-
Hi Jens any chance you can give a little update or a sneak peek at the current prototypes. Are you still hoping for a 2020 release ?
-
Hi Jens any update on the ECS v2 ghosting problem. I fitted the one I purchased a month or two ago over the weekend and the ghosting was immediately visible on my HP lcd monitor. Rev8a A500+ (recapped) A500 PSU (recapped).
No ghosting using RGB scart and ECS denise. The same monitor has no issues with ghosting when plugged into my Indi AGA Mk3. Like others have said WB palette changes and font size changes do make a little difference but it's still distracting.
-
would it not just be possible to sell an adapter plug that goes over the end of the square plug ?
-
Thanks packaged up and sent today should be with you in a couple of days. Letter included as per instructions above.
-
Is there a way that a proportion of the RAM on the ACA1211 board can be disabled then when this conflict occurs ?
-
Hi Jens I've been discussing this with the OS3.X developers and even with V40 card resources I can still reproduce the issue. I've also now tried with other pcmcia devices such as the surf squirrel and a cdrom. Coping data to ram results in a crash when cd0 is mounted. As previously mentioned if I remove the ACA1211 and insert an ACA1232 40mhz EC030 the problems go away. With a PCMCIA device installed if I run a memory test there appears to be a memory overlap. Is there anyway to map the fast ram to the same location as the ACA1232?
-
can anyone confirm if hdmi audio stops working in alien breed 3d 2 tkg. Music in team17 ocean intro works but no audio in the game its self. Using firmware from 1.4 archive.
-
@ spymate. I added a reinforcer across the horizontal plane as I found it too flexible. I also pulled out the corner to make it more rigid on mine. Printed using PLA. I was looking at metal filaments.
@ Jens is it ok to put a ground wire to the tower cases chassis. Similar to the rapid road ground wire.
PS ditched the logos
-
Do you need to flash the MK3 even if you dont have these problems?