Hi,
I recently bought a Buddha Plus One and put it in my newly fixed A2000. Right now the computer won't boot when I have the card inserted. The halt signal is stuck in high. With the 2.0 Kickstart I see some activity on the data bus for about 0.5 seconds before the halt signal is set. With Diagrom, halt is set right away. I have one other Zorro card, a Ariadne v1.2, that I have tested in in the computer and that works fine so the Zorro bus can't be totally broken. I have fixed some vias and traces on the motherboard to get the A2000 working. A previous owner have failed with at CPU socket replacement and damaged some pads and vias. So I have removed the socket and fixed the vias and traces but opted to have the CPU on an adapter board in the CPU slot instead of trying to reinstall the socket. Other that that the board and PSU are recapped and the smallish battery damage is fixed. My question is what should I investigate next? I have an oscilloscope if that helps.
Thanks!
/Tore