I recently purchased 2 Buddha 20th Edition
I put a Buddha Interface in an A2000 and it works fine. I have connected 2 cf cards to port 1 and a CD drive to port 2.
All devices work as they should.
I put the second one in another A2000 and nothing. Wont boot from any device. BOM not working or cf cards etc.
If i put the non working buddha into the A2000 with the working Buddha. And look in ShowConfig it sees both Buddha.
If i swap the ide cable from the working Buddha to the second Buddha. It does not work. A2000 goes to purple boot insert disk screen.
If i run BuddaInstallTool it says it has already got the updates.
But i dont know which Buddha it is seeing in BuddaInstallTool.
How can i get the second Buddha to work.
Both buddha have the jumpers removed when using cf cards etc. And jumper on when i put BOM in.