Hi Jens,
Thank you for continuing to support the Amiga.
I have installed a 20th Anniversary Buddha in my recently acquired A2000 but it will not boot from the DOM. I acquired the Buddha from yourself last year for use with an A500+ in a Checkmate 1500 Plus case and used it to attach a CD-ROM drive. It worked fine but I didn't use the DOM at all because I was booting from an ACA500Plus. Unfortunately, the setup was impractical and so I removed the CD-ROM drive and Buddha and stored them until I could find another use. Well, that use has arrived but I cannot get the machine to boot from the DOM (in port 2) with and without another IDE device in port 1. The A2000 (Rev 6.2) really is a barebones system and only has 1Meg of chip and no other memory. The previous owner has upgraded the kickstart to 2.04 though and there are no other Zorro cards installed (I don't have any Zorro 2 cards). The machine will boot from floppy but I removed the drives to concentrate on the Buddha only (they will go back in once I can get a HDD working). Without the drives and only a Buddha or Buddha and HDD fitted the machine will eventually just go to the kickstart screen and does not boot from the DOM. I have tried two HDDs with the same thing happening. I can boot a 2.04 WB image on a Gotek and ShowConfig shows the card is present and so does SysInfo. I read numerous forum posts here some of which suggested that flashing the ROM has fixed some non-boot issues so I tried that but still have the same results.
Not really sure what to do next and so would be grateful for any suggestions.
cathers