Posts by KKR75

Caution: Non registered users only see threads and messages in the currently selected language, which is determined by their browser. Please create an account and log in to see all content by default. This is a limitation of the forum software.


Also users that are not logged in can not create new threads. This is a, unfortunately needed, counter measure against spam. Please create an account and log in to start new threads.

Don't Panic. Please wash hands.

  • ACA500 Plus and Kickstart 3.1.4

    madk71,


    your original A500 kickstart v1.3 is 256Kb, whereas the new kickstart v3.1.4 is 512Kb. Each ROM slot in the ACA500plus is designed to hold 256Kb worth of data. But if you copy a 512Kb kickstart to the ACA500plus ROM, it will just use 2 slots.

  • ACA500 Plus and Kickstart 3.1.4

    you cannot load 3.1.4 into the ACA500plus as standard install, but you can certainly use it to install WB3.1.4.

    I have done that and it works great.

    You first need to flash a new rom into one of the available ROM slots in the ACA. (well it will use 2 slots, as it is 512Kb).
    You can use the acaflash tool for that.

    Once that's slotted in, you create a new advanced configuration in the F10 menu and select that ROM, and then either boot from the WB3.1.4 floppies and continue from there with the CF card formatting, WB install, etc... , or simply use WinUAE on your PC to create a WB3.1.4 CF card, and then you can just pop it in in your Boot CF Card slot and boot from there.


    Below my current 3.1.4 custom setup.


    Good luck




  • 1M Chip RAM expanion no longer available on ACA500plus

    Quote from jab76

    I'm still loving the ACA500plus by the way! I'm awaiting the new IndivisionECS to have even more fun with my old Amiga 500. And who knows, if I'm lucky I'll even add an accelerator and an X-surf to it.

    The ACA500+ is awesome. I have the ACE-2 2MB chip upgrade, along with aca500+, aca1221ec, RTC, and X-Surf 500, along with Indivision ECS. Running WB3.1.4 KS3.1.4 @ 42MHz (passive cooling) in PAL hires 8 colors, and the machine works like a charm.

  • Connecting 2 monitors to an A500 with Indivision ECS

    Hello,


    Is it possible at the same time to have one LCD monitor connected to the VGA port of the Indivision ECS, while having a CRT monitor hooked up to the RGB DB23 port ?

    I understand I will get the same display on both screens. I just wanted to know if it is doable for comparison purposes, or is it just one or the other type thing ?


    Thanks


    Karl