I have since disconected it completely and connected a realtime clock to the ACA500PLUS clockport and this is working correctly and showing up time when you boot the ACA500PLUS.
Posts by Firstaid2008
Caution: Non registered users only see threads and messages in the currently selected language, which is determined by their browser. Please create an account and log in to see all content by default. This is a limitation of the forum software.
Also users that are not logged in can not create new threads. This is a, unfortunately needed, counter measure against spam. Please create an account and log in to start new threads.
Don't Panic. Please wash hands.
-
-
I was using the device when suddenly the monitor flashed blue and everything reset. When it reboot the Rapidroad light had gone off.
I reset the power again and watched the RapidRoad. The white light flickered dimmly for a second or two then went off.
There is now no life showing from the RapidRoad at all. Anybody any ideas. This card is less than a week old.
It was powered directly from the motherboard and Df0: had been turned off in the menu of the ACA500PLUS.
-
-
Have you not considered a Rapidroad USB. Then connect your optical via USB etc.
-
-
Sorry I have just looked again at what i did. The ADF. Is it named UPD500P.ADF If so this is the installer to copy info to your ACA500+.
Just copy it to the CF card in your AUX port. Goto F8 on boot. Then to F for flash updater. This will then installer the software onto the ACA500+.
Then go back and and goto F7 and F5 to install to your hard drive.
Make sure when you copy the UPD500P.ADF to your CF AUX card it is the only UPD file on there.
-
Have you updated the firmware on the ACA500+. If so all you need to do is enter the Installer ie F7 on powerup. And option F5 installs the software onto your hard drive. This worked fine for me with OS3.1 but not with OS3.9.
OS3.9. I just copied the ADF to a usb stick and used it on a Gotek drive.
Unfortunately each copy of the installer you download off the server as its own copy of AMITCP: licence in it i believe.
This is probably why you only get a limited number of downloads of the installer.
Make sure you save a copy to a storage device for later use.
Hope this helps
-
Can anybody tell me if the clockport on the ACA500+ is capable of taking a MP3@64 sound adapter card. And if so which way around does it plug in please.
-
I also see in the Icomp/Indivision directory. There is a folder ECS-V2. Is this still work in progress and when are these expected to be in production. More new toys to buy. lol
-
Sorry Jens. I have found the issue. If i unplug my Blizzard1230 IV card. The CF lights work... LOL
-
CPU: 68030 FPU: 68882 Agnus: ECS PAL Denise: ECS
Chip RAM: 2048k.
Trap door slow $C0 RAM: 0k.
ACA500p on-board $C0 Fast RAM: 512k.
ACA12XX ID $00 ($00000000) Accelerator $68000000 Fast RAM: 64M
Physical ROM: 37.175. (Address $00F80000, Size 512k, CRC 0x000B927C)
MAP ROM area empty or checksum error.
RTC 1: Not detected.
DFO: $FFFFFFFF DF1: $FFFFFFFF DF2: $00000000 DF3: $00000000
ACA500p ROM: v0.126, HW ID: $08. Flash ROM ID: $EF/$16
MCU: DisMo V1.7 dec-20-2016. Config mask: $0000007F
X-Surf-500 installed. MAC 28.CD.4C.xx.xx.xx
So think it should be right. But no lights working. ??
-
CF lights still not working after upgrade to 0.126 ??
-
Using Amiga Explorer is really fast.. Saves having to change CF card from Amiga to PC.
-
Good afternoon Jens. Small bug. If the X-Surf-500 is online. Whdload games wont boot. They go to black screen and stop.
-
Ok Thanks.. Which rapidroad is the correct one to work on the ACA500Plus please.
-
Is there still planned to be a USB interface that will work with this device. Or will that be different again. Or will there be a combo.
-
Installed new firmware. And a couple of bugs have appeared. The CF lights on the ACA500PLUS have stopped working. And the installer will not install the virtual network disk on a CF card with OS3.9 Installed. Worked fine on OS3.1.
-
Sorry Jens. When i download the installer for menu v0.125 it shows v0.122 when trying to install. And the date on the UDP file is the same as before.
-
When will the new firmware for the ACA500Plus be available on wiki. Please. I have ordered the new X-Surf-500 and wish to prep all ready for its arrival