Posts by ynlmns

Caution: Non registered users only see threads and messages in the currently selected language, which is determined by their browser. Please create an account and log in to see all content by default. This is a limitation of the forum software.


Also users that are not logged in can not create new threads. This is a, unfortunately needed, counter measure against spam. Please create an account and log in to start new threads.

Don't Panic. Please wash hands.

  • C64R MK2 and Ultimate II (+)

    I've tried a few different chips I had. I have 2x 6510 and 3x VIC's from very different different dates). unfortunately the 8500 I had doesn't work.


    I now have a combination for which the screen is better (still artifacts).

    Still had to use these settings for Ultimate II v3.7:

    CPU Addr valid after PHI2: 120ns

    PHI2 edge recovery: Disabled


    I'll leave it at this. It's not that I use it very much, thanks to all the trainers build in the games these days. Can't remember that the games I had in the '80 had them, but it's makes playing a lot easier.

  • C64R MK2 and Ultimate II (+)

    Okay tried almost all variations (not all worked) to get it to work for Final Cartridge III -= > Freeze.


    Commodore C64 Reloaded MK2 V20180227


    Best I could get after testing various settings was:

    Ultimate II v3.7:
    CPU Addr valid after PHI2: 120ns

    PHI2 edge recovery: Disabled


    Ultimate II+ v3.7:
    CPU Addr valid after PHI2: 128ns

    PHI2 edge recovery: Disabled


    Screen is barely readable with these settings, but was the best I could get.


    The advice for "PHI2 edge recovery: Enabled" didn't work for me for both of the cartridge versions, I had to disable it to get a "readable" screen.

  • C64R MK2 and Ultimate II (+)

    I've got a problem with cartridge support and the freeze function on MK2 Reloaded. When I have the Final Cartridge III active (KCS has the same problem) and I press the freeze button I get a "garbled"screen. The menu is working, when pressing the cursor you see the image change. (See screenshot)

    The original Final Cartridge III works correctly (as is the orginal KCS cartridge) with the Freeze function on the MK2 Reloaded.

    The Ultimate II (and + version) with Final Cartridge III with the Freeze function work correctly on a real C64 (pal).


    Is there a (timing?) setting I should set to get the screen to work?