When switching on the IDE speeder modes The Amiga will hang on a cold boot. However The system will boot fine from a a soft boot and sysinfo shows the increase in transfer speed. If I continue to use the ide boots modes the file system becomes corrupts after sort amount of time, normally after a cold boot.
The card is installed in a recapped 1d.1 revision a1200. I removed the E121C and E122C and I'm using the original power supply. The IDE to CF adapter is on a short IDE cable and the bottom RF shed is installed. Top shield not in use due to an indivision. The Cf card is isolated from the indivision to prevent shorting.
any advise on that what steps I can undertake to get this stable? thanks