I was wondering if the ACA500plus together with the ACA1234 will fit the plexilaser case? Visually the ACA1234 seems quite long.
ACA500plus + ACA1234 plexilaser fitment
- Bj0rn
- Thread is Unresolved
Caution: Non registered users only see threads and messages in the currently selected language, which is determined by their browser. Please create an account and log in to see all content by default. This is a limitation of the forum software.
Also users that are not logged in can not create new threads. This is a, unfortunately needed, counter measure against spam. Please create an account and log in to start new threads.
Don't Panic. Please wash hands.
-
-
Bj0rn
Changed the title of the thread from “Aca500plus + aca1234 plexilaser fitment” to “ACA500plus + ACA1234 plexilaser fitment”. -
Yes it fits in very well. I havesuch a solution at home. However, I would leave the back wall free so that you can easily insert and exchange CF cards.
-
Yes it fits in very well. I havesuch a solution at home. However, I would leave the back wall free so that you can easily insert and exchange CF cards.
Can I also leave it closed if I want?
-
-
Thanks for the info, I think I’m going to order the ACA1234
-
Thats a good idea.
The pic is a bit old. There is an Indivision ECS V3 inside too. I can also recommend this extension.
-
Thats a good idea.
The pic is a bit old. There is an Indivision ECS V3 inside too. I can also recommend this extension.
I already have the Indivision ECS v2 and the ace2b
-
That rocks!
-
I have xsurf500 on aca500+ and aca1234 and everything fits to back plate. Have lan cable extension that is mounted just milimeter above cf card. Vga adapter also fits with extension cable from ecs v2.
So if need to remove and unplug the case from a500, have to unplug vga and eth from back plate and in addition vga extension from a500 internals, that's it..
regards -
Can you fit the backplate with using the CF cardslot on the aca1234? Do you use an LAN Adapter screwed on the backplate?
Here that doesnt work well
-