Note: I am using Kickstart 3.2 and OS3.2 which can use large HD's.
1. With the power off connect a second HD to the right IDE port on the Buddha, REMEMBER TO REMOVE THE JUMPER!! Power on.
2. Make a copy of HDTOOLBOX in the Tools Folder and rename it to BuddhaHDToolBox.
3 Right click on the icon, select icon, change scsi.device to buddhascsi.device, change max address to 3, max lun to 3 and save it (I don't think it matters but I did).
4. Open BuddhaToolBox and you should see two devices chose address 2 and chose change drive type. DO NOT choose address 0, that is your boot HD!
5. From here you can follow the manual. When you partition the new drive chose default and rename the new drives do not make them bootable.
6. When you get to read the new drive configuration may fail, fill in the manufactures Name with model number and give it a Drive Version if you can find it or make something up like 3.AC and try it again.
7. Save changes and exit. It will ask you to reboot.
8 You should have two new drives. Format each drive using quick format. If you chose format, it will take hours for each drive. Chose format if you suspect bad sectors.
9. Now you can drag your files to the new drives for backup. Copy disk.info from your BDH0 to the new partitions to give them a new look.
If you have problems contact me.