Hi,
I just installed ACA1234 to my A1200. O ordered it few weeks ago, so it should be pretty much the latest version.
ACA seems to be working just fine, it is just that I haven't been able to successfully boot from the ACA1234 CF card slot after installing WB3.1. I've tried several CF cards, Transcend x133 4,16 and 32GB versions, Sandisk Extreme 32GB, Kingston 4GB CF and even Transcend CF300 Industrial 256MB card. Kingston came from my old A600 installation, so it definitely has been working on Amiga before. Every card behaves pretty much the same, no boot.
If I use the Amiga IDE slot with original Conner HDD which has WB 3.0 installed, everything works just fine and computer boots from it as usual and I can successfully run for example WHDLoad demos from it. ACA1234install mounts OK, ACATool works and even the CF Card in ACA1234 slot and its two partitions are mounted correctly and can be accessed normally. It just doesn't boot from there and pretty much always stops at Software Failure window C:AddDataTypes Program Failed (error #80000004). IdeSpeedup is at default.
My system is with 1D4 MB revision and I just recently recapped it and removed the two recommended surface mount capacitors from the underside of the board. It still has the original 3.0 KS ROMs onboard. No other mods or accessories are installed, except RTC on the ACA clockport and currently I have the Conner HDD connected to the internal IDE.
I'm suspecting that for some reason the KS3.1 maprom function is not working and that is causing the issue when trying to boot from the newly installed WB3.1. The thing is, I don't understand what I'm doing wrong here, so help is appreciated.
Thanks!