Or, if he can change the software to allow it to be installed in ACA500 plus with 68000CPU. It would be very nice.
Posts by FranciscoJr
Caution: Non registered users only see threads and messages in the currently selected language, which is determined by their browser. Please create an account and log in to see all content by default. This is a limitation of the forum software.
Also users that are not logged in can not create new threads. This is a, unfortunately needed, counter measure against spam. Please create an account and log in to start new threads.
Don't Panic. Please wash hands.
-
-
What I mean, if it is a way to install it, with an original Amiga ACA 500 plus 68000 CPU.
-
Hello,
Is that a way to install Picasso96 RTG software in Amiga 500 with ACA 500Plus ?
Reason: To use the NATIVE driver for better chip memory management.
Thanks in advance,
Francisco
-
If you're contemplating on buying this card (not sure if the pictures you're sharing are your own card), then I suggest to avoid this card. Yes, I did develop it back then, but no, I won't do any service on them,
Yes. I was thinking on buy it, this is not my card, but after your answer, no more intention. I will avoid it.
Thank you
-
Hello,
Can I use ACA 1231 with ACA 500 Plus?
Thank you for your time,
Francisco
-
Hello,
Just to report, that I tested the last Picasso 96 RTG beta , with Amiga 500 Pistorm, and it is working fine wthout any issues. Instaled Amiga OS 3.2 V47.96 ROM and worbench 47.2. software.
RTG.library V42.753 from ICOMP.
Francisco
-
OK! Just to record, if this can help....
With RTG.library V 40.3945 (16/11/99) A.Kneer T.Abt , is working fine with no double images issues.
Thank you,
Francisco
-
Hello Jens,
I´ve already had seen this topic, and changed the ZZ9000 driver tooltype to " DISPLAYCHAIN=No" before.
But unfortunately, did not correct this issue. It stills remain.
Tested with ICOMP rtg.library Vbeta 42.753
Thank you,
Francisco
-
Hello Jens,
Other situation here....
When using the Amiga native modes, NTSC/PAL Hi Res Interlaced, the new RTG.libray is showing double images.
The original RTG.libray from version 2.0 (aminet) is fine and showing the correct image.
See photos.....
-
Hello Jens,
Thank you for the new RTG library. I think it solved the problem. (Black screen)
Colours are ok now.
Francisco
-
OK! Thank you
-
The 4000 motherboard is 100%. All recapped by myself. All capacitors original SMD from AmigaKit.
-
Buster 11
-
I can't really make out what the problem is on your photo - there's some dark-hard-to-see part at the top that may be your actual problem, but it might as well be a weakness of the camera used.
It is not a weakness of the camera, it is a black area. Could not grab the image. I took a picture.
-
Reverting for the RTG.libray Version 41.15 from 20/12/19, everything is normal again.
Installed AMIGA OS 3.2 workbench V47.2
Amiga Kickstart V.47.96
-
Hello,
Just updated Picasso 96 software to the new version 3.11, but having some problems with the new RTG.library Version 42.747 from 06/08/21
Amiga 4000D with ZZ9000 graphics card installed. Version 1.8 firmware. Version 1.8 zz9000 software installed.
Picasso 96 RTG software installed version 3.11 from ICOMP.
This is what I got with the new RTG.library version 42.747
-
Just placed an order for the new license.
Francisco
-
OK! no problems at all.
Thank you
-
Oh! I forgot to mention.
I am using Picasso 96 RTG with my other Amigas too, which have the Amiga OS 3.2 installed and without graphics card.
Picasso 96 together with the "NATIVE" driver, as a replacement for the "FBLIT". As stated in Amiga OS 3.2 FAQ.
This way I have more CHIP MEM available to the system, as FBLIT does.
see FAQ below:
Code- 4.6 * Can I use the FBlit patch with AmigaOS 3.2?
- Yes you can; however we don't recommend you use it because it does not follow the Amiga development guidelines, which results in an unstable system.
- Instead, we suggest you use Picasso96 together with the "Native" driver (both available on Aminet). This will bring the benefits that FBlit provided, but on a clean, AmigaOS-friendly manner. And not only that, but it will also enable you to use applications that only worked with Retargetable Graphic Cards (RTG), despite not having one.
- 4.7 * I am using Picasso96 with the "Native" driver, both downloaded from Aminet, and I get some issues displaying transparent images. This is a known issue of older Picasso96 (P96) software, where bitmap.image will not work correctly for transparent images on non-RTG screens.
- The solution is simple: upgrade to latest P96 (available from Individual Computers) and everything will be fine.
- Note: Do not install two different RTG systems on the same system, as this will most likely cause conflict between them.
-
Ok, but the update would be to the V 3.01 from December 2020, then?
Mine is the initial 2.4.4, after that there was 2.4.5, 2.4.6, 3.0 (October 2020) and 3.01 (December 2020).
So I lost many updates.
Thank you
But if it is very difficult as you say, to give me online access online, let it be, no problems at all. I am using it witn ZZ 9000 graphics card in Amiga 4000.