Posts by Tobias
Caution: Non registered users only see threads and messages in the currently selected language, which is determined by their browser. Please create an account and log in to see all content by default. This is a limitation of the forum software.
Also users that are not logged in can not create new threads. This is a, unfortunately needed, counter measure against spam. Please create an account and log in to start new threads.
-
-
New / other features are out of the question at this point, sorry. In particular another drive emulation is a HUGE effort, for very little gain (there is almost no software that requires a 1571 or 1581).
-
Isn't wheel support built into 3.2, so you don't need a driver at all?
-
Did you make any changes to your configuration? Perhaps added some kind vga/hdmi adapter? There have been cases where this triggers the protection circuit of the ca-psu
-
That's a good idea - maybe Tobias could write this file out when saving a config that contains a 15kHz screen. *If* he's putting the feature on his todo list
As soon as there is a 15kHz mode this is totally doable, of course
-
If you can reproduce a case when it does not update... let me know
-
You'll have to go to the menu first, images will only be updated when you enter the menu.
-
-
KVM might be a gamble, depending on how exactly the switching is implemented. Never tried with mine to be honest
-
-
If you really need composite, then using the regular A/V port is probably the better idea.... However it may or may not be the cause of the problem you are seeing
You should be able to find a cable at many retro stores/webpages ... or build it yourself
-
Quote
Mega65 is not planned to be open-sourced
But of course it is, has been from day one: https://github.com/orgs/MEGA65/repositories
That said, porting it to chameleon is out of the question - it needs a much bigger FPGA
-
please open a new thread for your problem
-
You should really try with a regular PAL monitor (CRT if you can) first - chances are the display just cant make sense of the weird non standard signal that a C64 produces.
-
This? https://csdb.dk/release/?id=151275
It seems to work just fine here - try resetting the settings to default first
-
Try with a clean SD Card, ie freshly formatted. Perhaps also try another card (not all cores will work with sdhc or even sdxc cards)
-
That is correct
It might be possible to support that Keyboard via the PS/2 connector too - however, none of the cores is prepared for this.
-
In Cartridge mode (plugged into C64) anything that works with a C64 will work.
In Standalone mode (with the docking station) the "paddle" lines do not actually work as paddles, which is what the 1351 mouse uses, so that will NOT work.
-
Oh, yes. At the Docking Station only "Joysticks" will work. And 2nd/3rd Button works like on Amiga (pull to GND).
-
Well, if it works at a C64, it will work with Chameleon