Caution: Non registered users only see threads and messages in the currently selected language, which is determined by their browser. Please create an account and log in to see all content by default. This is a limitation of the forum software.
Also users that are not logged in can not create new threads. This is a, unfortunately needed, counter measure against spam. Please create an account and log in to start new threads.
Don't Panic. Please wash hands.
-
Yes, I am replacing the old files with the new ones whenever there is an update. If you re-download, you should get the latest version. Within one year of purchase, this is free, and I can set the # of available downloads higher during that period.
So, after one calender year, the licence has to be renewed?
-
The "fidling" was that I played around with the options in the ACA500Plus that became active with the blizzard connected.
I didnt encounter any problems what so ever.
-
Well, I had a Blizzard 1230MKIV connected to an ACA500plus (bought one in December last year) and it worked fine for an hour or so while I was fidling with it.
And no, it didnt stop working after that hour or so, it just whent back into my A1200
-
I have 2 Indivision AGA mk1's and one has CLPD core V1 and the other V3 and I'm curious what the difference is?
-
You need to be logged in to see that item in the shop
-
As the thread starter I want to clarify that My problems was due to a PSU that didnt regulate properly.
Jens has mentioned this in other threads and I recently checked mine and it was at 4.75v connectedto the amiga(+- whatever % my cheap multimeter gets wrong).
With another amiga 4.5a psu (that was at 4.95v) all my cards work (well the aux port does not like to hotswap the cf adapter) including the 1gb cf card that I had issues with...
And my external floppy drive suddenly works again...
-
The AGA MK2 comes with a ground wire, but how about the MK1? Would it benefit from added grounding and is there a suitable spot on the card to "connect" to?
-
Thanks
-
Thanks, so for real CF cards they should all work as long as they arent faulty...
I have had a 2GB cf card that always worked in the aux slot, while several difrent SD cards in adapter never worked, fat&fat32 in the AUX.
While at the same time the Boot slot seemed to like any sd card except a 2gb one.
And a 1GB cf that neither slot seemed to react to, that suddenly in the boot slot showed up on workbench (I had been powercycling to test the diffrent virtual disk options).
One sd card worked once, and after a powercycle (I didnt touch it) it was CFAUX:NDOS (and later after trying out several other sd card it became rock solid working)
All while every card (CF or SD) was readable with my PC.
Well, all cards are old (and of dubious health) so I'll blame them and buy some fresh CF cards.
-
I'm having problems with CF to SD adapters so I'm about to buy Real CF cards and now I'd like to know which CF card standards and sizes that the Aca500+ ver.2 accepts?
-
Just installed my ECS2 in my rev6A amiga 500 and i get ghosting too, still way much better picture than through a gbs8200
-
In the printed manual it says that a pdf version can be downloaded from the wiki, but I can't find it...