Posts by BanisterDK

Caution: Non registered users only see threads and messages in the currently selected language, which is determined by their browser. Please create an account and log in to see all content by default. This is a limitation of the forum software.


Also users that are not logged in can not create new threads. This is a, unfortunately needed, counter measure against spam. Please create an account and log in to start new threads.

Don't Panic. Please wash hands.

    So I got a guide from EAB where I am bit stock atm. http://eab.abime.net/showthrea…hlight=indivision+aga+mk3


    Under creation of custom vga mode he write :


    - You will notice the frequency values will change by doing this. Use the Pixel clock slider until the Vertical Frequency changes back to 60Hz again, or closest possible.


    In that specific screen I don't have a Pixel Clock slider only F. Porch, Sync Len and B. Porch

    Which of those does he refer to ?


    My Samsung Suncmaster P2450 has in the Standard Signal Mode Tabel a Pixel Clock

    VESA, 1280 X 1024 63.981 60.020 108.000 +/+
    VESA, 1440 x 900 55.935 59.887 106.500 -/+
    VESA, 1600 x 1200 75.000 60.000 162.000 +/+
    VESA, 1680 x 1050 65.290 59.954 146.250 -/+
    VESA, 1920 x 1080 67.500 60.000 148.500 +/+


    Can't figure that one out


    Any suggestions ?

    Nevermind.

    Im not a technical person in matter of screen resolutions and how it works :)

    My strength is network in terms of user and group policies on modern computers.


    Seems like I now have 1024x768 70hz without icon flickering but have no clue how I managed to get it (Pure luck 8))

    My Monitor is a Samsung Syncmaster P2450


    If I start IndivisionAGAmk3.1.5 and make a copy of 1024x768 HiGfx

    It gives Select->on SHires and loads of other things I have no idea what means

    VGA Mode is set to Pre 1024x768 70Hz Vesa

    Test Mode is set to HIGHGFX:Super-High Res Laced (which is 1024x768)


    If I click Test/Adjust and click This time it come with a full 1024x768 70Hz picture (fullscreen and no flickering)

    If I click Okay and then click Save & Apply and click Use nothing really happens and I'm back to 800x600


    So how do I change the screen other than using Screenmode under Prefs ?

    This configuration is making me nuts

    First : I'm using HDMI and not VGA

    Second : Choosing anything above 800x600 gives some crashed icons (not all icon but usually shiftet line to the right)

    Third : I have absolutely no idea how to set this up (I'm afraid the guide on wiki doesn't help. Too much text that makes it even more confusing.). I need a pictured guide with specific text for the specific areas,