Caution: Non registered users only see threads and messages in the currently selected language, which is determined by their browser. Please create an account and log in to see all content by default. This is a limitation of the forum software.
Also users that are not logged in can not create new threads. This is a, unfortunately needed, counter measure against spam. Please create an account and log in to start new threads.
Hello.
Is there a way to force the MicromysV5 into amiga mode with scroll mouse support
The double quick reboot that the pistorm32 does is making me believe it's somehow forcing it into non amiga mode as I get random Jumping mouse pointer.
The Micromys itself works great if put in another amiga or if the pistorm32 is removed. Someone on Facebook said there are jumpers inside but I could not see any information on the wiki.
I too see this on 2 of my mk3 AGA when starting in highgfx mode, Its just as nuttie described, both on a AT 1D4 and a C= 2B board. I haven't tested the CD32 in highgfx mode yet. Would it be Is possible to change the configuration program or the flashtool to allow the CCKLine and PCLK settings to be set from the command line, leaving the reset of the configuration intact. That way a simple iconx script could be called rather than having to navigate through the program to alter the advanced settings.
Probably of topic but as it was mentioned will the A1200 reloaded have things like indivision mk3, rapidroad and micromys technology neatly integrated into the motherboard. design
I had this on mine in conjunction with an LG 32" monitor. I bought a higher quality short (1M / 3ft) HDMI cable. Which seemed to resolve it.
For some reason, which I can't remember the issue came back. However, I reduced the pixel clock gradually until I got to a clock where it had gone away.
Sounds great. Are you able to post them out to owners if they pay the postage cost. If they are free, which is a nice gesture btw, it shouldn't pose a problem to the UK.
+1 upgrade board
here are the soldering points that I used ( motherboard rev 3 )
please note that pin 125 on the expansion connector is located underneath the motherboard - there is a transition pin on top.
Thanks, do you have a photograph which includes the white connectors orientation?
Hi would you ba able to update the wiki with the CD32 signal pickup points.
And how will I connect a original AMIGA Keyboard, wich I has converted via Keyrath V2 Adapter to USB to the Lyra Adapter?
My A1200 is towered. I bought a cheap mitsumi A500 keyboard from a well known auction site with broken keys. It can be converted into an A4000 style keyboard by desoldering the motherboard lead, LEDs and the transistor. I then bought a ps2 extension lead, cut one end off, stripped back the wires and soldered it in place of the lead. I can't remember the pinout off hand.
I then removed the upper key assembly from the A500 keyboard and replaced it with the upper assembly from my A1200 keyboard. Thing to note here is the doner A500 keyboard needs to be a small enter key model or you'll need to change the membrane too, though changing the upper part is optional depending on the condition of the doner A500 keyboard. You now have a keyboard you can mount in a micronik keyboard case, old A2000 keyboard case etc. You can then use this with either the excellent icomp lyra 2 or 3. You won't need the sum usb or keyrah then.
GGL A500 to A4000 conversion will show you the pinouts.
Maybe not worded very well. The CD32 combo keyboard serial port is labelled AUX. The CD32 kipper2k riser has a ps2 keyboard port. Sometimes I have my fmv cartridge plugged in the cd32, Sometimes I have my tf330 plugged into my cd32. If you have the kipper2k riser plugged you can't use the cd32 keyboard port. So my query is as I can't use the Mk3 indivision adapter, as there is no CIA to connect it to in my case, I need to solder the four wires to the motherboard. Will the indivision pick up the keyboard presses regardless of the keyboard port used ? Hopefully that makes sense.
Will the solder points be the same regardless of the keyboard socket used at the time ? I can use either the AUX port or the kipper2k ps2 port depending on how I have the cd32 setup.
Thanks all. I've gone down the parallel port to 1541 route as dracopy on github (j version) seems broken on my c64 and doesn't allow you to step back directories on the sd2iec. Version d works well, but this is a discussion for elsewhere.
Is it possible to connect a C= 1541 to a catweasel and write a 40 track D64 image back to a real disk. Reason I ask is that I've bought some pystronik digital games thinking I could simply copy them to my sd2iec. However it only supports 35 track D64 images.
I have a mk3 flipper and the first interaction of the mk4 pci.
Jens I was wondering if you have ever considered making an indivision C64. Similar to the MK3 AGA, that could multiplex SID and VIC2 into HDMI?
Any update that can be shared ?
@ Guest
Elbox radeon.card does work with v3.1 p96. I haven't got around to updating to 3.2.x yet.
As your friendly with hyperion, they have a OS4.1 p96 radeon driver for the mediator and also a version of warp3D for it. Is there a way that can be used. Happy to buy a separate package if you can license and back port.
I have a lyra 3 and mk3 indivision AGA in my A1200T. Both can be used with a meditator TX also.
Hi Jens is shipping to UK still available ? Is there a change to the minimum order value. Would like to order a couple of the new CF adapters, but don't really want to order 4 or 5 to pass the threshold.
Hi Jens, I received this back. Many thanks for the repair. Please mark this as resolved.
Yeap that's the one. Thanks. No rush just glad it's got to you OK.
hi Jens could you see if this has turned up yet ?
