Hello everyone, i'm the proud owner of the Keyrah v2 board (very kindly donated to me along with a fully working A1200 keyboard). So my project i'm undertaking is fitting the Keyrah v2 board along with a Raspberry Pi 3b + board and all the cables that's required, inside a brand new Amiga 1200 casing (made by A1200.Net and sold by RetroPassion here in the UK).
I also purchased from R/Passion, the A1200 "LED Board" (with Power, F.Disk and H.Disk) LED's. I have tried to get the "Power and H.Disk" LED's to light up when connecting the LED board's pinheader to the correct pins on my Keyrah v2 board but i'm getting no activity at all from the LED's.
The only way i've managed to get the "Power LED" to light up, is by soldering 2x Dupont wires to 2x solder points on the underside of my R/Pi 3b + board but everything i've searched online to get the "H.Disk LED" to blink or light up when the Pi is reading the micro SD card hasn't worked at all.
All the 3x LED's on the board do work and are not faulty or blown (tested with my multimeter to double check this)
Please can anyone who has managed to get these LED's working from the Keyrah's pins, please help me.
Thank you ever so much.