Hi.
I know I should have checked first but I was excited when I saw Epsilons blog and that it worked together.
I'm looking for if someone has some tips or maybe this will not work for me.
And I bought it directly from you Jens, Love your hardware
The problem descriptions:
The Network adapter shows no errors if I beet with no startup-sequence and run the xsurftest
DHCP do not work, static "works"
It detects and shows on my Network as a Network device (with Indidividual id)
The USB controller detects and devices looks like they detect class properly
Mouse (slow devices) "kind of work" they work but are a little irratic
USB devices detect and I get the error that they are probably not FAT nor NTFS formatted
The same USB devices work in my A1200 with a clockport USB adapter so I know they are readable
What I tried so far:
Having the ZII jumper both set and unset (seems like no difference at all, it looks like it detects it propely)
Changing the MMULib config (that will produce some error messages in Trident)
Kickstart 3.1, 3.9 and 3.1.4 with no differences in resluts.
Turning on and off all the setpatch and other library patches
Hardware:
A500 mainboard rev 6A
Memory expansion to get Chipram to 1MB (Rev.B6 from amigastore.eu)
Vampire A500V2
A1500 Plus Zorro busboard
Software:
MUI 3.8
Poseidon 4.5
MMULib
RR driver 1.7 (also tested with 1.6 and the older versions)
OS: 3.9 (tested with KS 3.1, 3,9 and 3.1.4) (not working), OS 3.1.4: (will create a clean install CF and try again, OS 3.1 (have not tested yet)