Hi, I have an Amiga 3000 with Buddha controller installed - no other cards installed apart from a SCSI to SD adapter.
I can use the Buddha DOM module to format and install WB on a CF card fine with no issues, and once installed, Workbench boots fine.
My problem is that I wish to remove the Buddha DOM module so that I can use the secondary IDE port for other devices (CD-ROM, HDD etc). As soon as I remove the DOM module (and remove the jumper) I find that I cannot boot into the CF card and all I get is the Amiga Kickstart ROM screen. If I boot into Workbench using a floppy disk, I cannot see either of the partitions on the CF card.
Am I doing anything wrong?
Many thanks,
Matt